© Brooks 2018
P/N B18646
Rev1
230V~ SMOKE & HEAT ALARMS
EIB160e Series
Instruction Manual
with Rechargeable Battery Backup
The EIB160e series is supplied with an Easi-Fit base that
allows very quick and simple installation of the Smoke
Alarm, combined with simple detector head removal
and replacement. The Easi-Fit base automatically
connects both mains power and battery as the detector
head slides on to the Easi-Fit base.
Up to 12 Smoke/Heat Alarms can be interconnected
so that when one senses fire all the units alarm. (More
Alarms can be interconnected. Please contact your
local distributor for more information.)
Interconnection can be achieved by hardwire or through
a modular RF module, the EIB100MRF, which can be
inserted into the base of the Alarm.
A green LED indicates the presence of mains power. A
red LED will flash rapidly in an alarm scenario.
The Smoke/Heat Alarms feature a large combined test/
hush button.
The “Test/Hush” button will either silence false alarms
or perform a unit self-test.
In “Test” mode the Alarm will perform a self-test and
sound the horn.
In “Hush” mode the Alarm will be silenced for a period
of approximately ten minutes to overcome false alarm
conditions. It will then automatically reset itself.
Introduction to EIB160e
Smoke/Heat Alarms
User Section
