Ehrgeiz Fusion FS-60 RGB/1, Руководство по эксплуатации, Страница: 6 / 26

5
DANGER OF FIRE!
When installing the device, make sure there is no highly-
inflammable Material (decoration articles, etc.) within a distance
of min. 0.5 m.
Mount the projector with the mounting-bracket to your trussing
system using an appropriate clamp.
For overhead use, always install a safety-rope that can hold at
least 12 times the weight of the fixture. You must only use safety-
ropes with quick links with screw cap. Pull the safety-rope
through the hole in the mounting-bracket and over the trussing
system or a safe fixation spot. Insert the end in the quick link and
tighten the safety screw.
The maximum drop distance must never exceed 20 cm.
A safety rope which already held the strain of a crash or which is
defective must not be used again.
Adjust the desired inclination-angle via the mounting-bracket and
tighten the fixation screws.
DANGER TO LIFE!
Before taking into operation for the first time, the installation has
to be approved by an expert!
Power Connection
!! CAUTION !!
Never leave this device running unattended!! Every person that
is involved with this Item has to be qualified!!
Connect item with the main plug. The voltage and frequency
must exactly be the same as stated on the device. The power
plug must always be inserted without force.
Cleaning and Maintenance