Ehrgeiz Fusion FS-60 RGB/1, Руководство по эксплуатации, Страница: 12 / 26

11
3.1.8. LED PCB
Shows the temperature of the LED board. If the temperature is
higher than 75°C, the unit regulates down the light output until
the temperature is within the working temperature.
3.1.9. Software version
Shows the actual software version.
3.2. DMX control
- Press the UP or DOWN button until DMX MODE SETUP
appears in the display.
- Confirm with ENTER to enter the submenu.
- In the submenu you can choose between the menus by
pressing the UP or DOWN button, confirm the submenu by
pressing ENTER. By pressing MODE you are able to leave the
menu. The display is blinking if there is no DMX signal.
3.2.1. DMX modes
In this menu you can select the control channel quantity and the
excitation.
You can set up also the DMX mode (MODE) and the DMX address
(ADD)
-
with the UP or DOWN button you can choose MODE or ADD
- Choose a function and press ENTER. Now set up the desired
value by pressing the UP or DOWN button and confirm again
with ENTER. In this way you can proceed with every set up
possibility.
The DMX modes are like the following diagram shows.