Ehrgeiz Fusion FS-60 RGB/1, Руководство по эксплуатации, Страница: 13 / 26

12
3.2.2. Master mode
The master mode has not to be set up. It is automatically
started in the automatic program, the music control or in the
manual control. It’s important to make sure that the other
plugged units are working in the slave mode, and that there is
only one master unit in the line.
3.2.3. Slave mode
In this mode the unit reacts congruent to the master unit. If you
have plugged a few units into one line and connected them by
using a DMX cable, you are able to make one unit to be the
master. In this unit you can change your settings, and all other
units in the slave mode will follow you master instructions.
3.3. Automatic program
- Press the UP or DOWN button until AUTOMATIC MODE
appears in the display.
- Confirm with ENTER to enter the submenu
- Here you can obtain the predefined programs (PROG) and the
speed of them (SPEED).You can choose PROG or SPEED by
pressing the UP or DOWN button. You will find a program
overview in the chapter “reference”
- Choose one of the functions and press ENTER. Then set up
the desired value by pressing the UP or DOWN button and