Connections
→
DMX
7
DMX
We recommend the use of High quality XLR connectors like original NEUTRIK HD. Please use professional digital DMX cable with a
surge impedance of 110
Ω
.
Please notice that the USITT DMX Standard does allow to use a max of 32 DMX fixtures in one line. You should terminate the signal
by a 120
Ω resistor.
In the Standard mode the Fusion 2 uses 12 DMX channels.
Connect the devices and increase the value of the DMX channel by 12 from one device to another
Wireless DMX
The device can be equipped with a Wireless DMX Receiver from Wireless Solution Made in Sweden (W-
DMX ™).
Please contact your Ehrgeiz distributor for detailed information of the necessary hardware & software update.
When the W-DMX receiver is installed, enable it with the option in the service Menu (only needs to be done once and does not set
back when you set the device to “factory default”
To establish a connection, enable the W-DMX Option and
simply use the “Link” Option in the
Fusion 2 Menu. After that, set your
transmitter to Link Mode.
After both devices are linked you will be able to control the device via Wireless DMX, as long as the W-DMX Mode is turned on in the
Menu.
