Installations
→
Horizontal hanging with tilt bracket
5
Horizontal hanging with tilt bracket
You can attach the Fusion 2 to a Truss or Pipe. Notice that the tilt bracket should face down from the hanging structure.
Use the centered holes in the Tilt Bracket
Horizontal hanging with Omega Bracket
You can use the additional fix Omega Brackets (optional accessory) to hang the device horizontal
Safety attachment
In any case of rigging the device attach the Safety rope to any of the dedicated eyelets integrated into the sliding brackets.
Hanging vertically
“dropped”
Use the vertical Adapter set (including Omega Bracket, optional accessory)
to “drop” the Fusion from a
rigging structure.
Notice that we will release a detailed rigging manual for the different options shortly.
Vertical Installation on the floor
Use the vertical Adapter (optional accessory) in combination with a base plate (optional accessory).
Use the Small standing plate (optional accessory) if you only wish to install one Fusion 2.
If you want to install more than one device, screw the Small standing plate to a normal truss base plate.
Notice that we will release a detailed rigging manual for the different options shortly.
