
Installations
→
Structural Connection
4
Installations
Your Fusion 2 can be installed in every kind of following positions. Please see the explanations and rely to the instructions for a safe
operation and secure handling.
Structural Connection
The Fusion 2 can be connected using the included quick-release pins. Place the devices next to each other.
Insert both Pins to connect the devices.
For the first uses this may be a little hard. Move the devices a little until the Bolts can be inserted completely.
For vertical installation do not exceed the amount of 3 pieces. (caution, provisional specification) In case of hanging installation,
each device needs to be saved individually!
Using the quick-release pins for horizontal installation is not recommended. Each device should individually be installed with the
given installation options below.
Horizontal Installation on the floor
You could place the Fusion 2 on the floor. Please make sure the surface is plane and the reliability of the floor is sufficient.