Set date / time
Adjusts the internal clock of the block to PC system time.
Read version number
Read the version number of Net Scale firmware.
Test scale
Start display test at scale.
Zero:
Set the corresponding scale to zero
Set/delete Tare
Moves display value of scale to tare memory. When tare is set,
the value is written from memory back to the display.
Send fix tare
Fix tare input field is written to the tare memory.
„0“ deletes
the tare memory.
Read measured value
Reads the value from scale and writes it to the response field.
Registration network
Reads the measured value and stores a data record in the
verifiable memory.
Registration manual
Registration of a weight for old net scale systems with only one
scale (not in use with new systems).
Clear
Deletes content from „Response from Net
-
Scale“ field.
Execute
Transmit the settins to Net-Scale.
Table 8
–
Functions
Via service tab the IP-address and INI-file can be changed.
Figure 5 - Service settings
Overwrite IP-address and
confirm with „Change“ button (only works if DHCP is disabled, see also
section UDP Protocol configuration).
