Figure 4 Net-Scale User interface
The Demotool helps to check and configurate the Net-Scale parameters. To run this tool no installation
is necessary. Simply start the NetScaleG2.3.exe from any data folder. Main usecases are:
•
Assign an IP-address
•
Control the scale communication
Please only change the IP address of the Net-Scale if you are familiar with the setting changes. In
the event of an error, it may no longer be possible to reach the net-scale via the network.
The demo tool automatically finds all available device blocks in the network. Therefore DHCP needs to
be activated or the static IP address within the the address range is set. Choose your Net-Scale via pull-
down menue IP address.
To receive data from a scale, it is necessars to enter the correct scale number and frequency channel
in the software. Use the data fields Scale-No. and Frequency channel.
