14
English
The set includes:
‧ 2 × T5 adapter
⑩
(⌦L)
‧ 2 × T8 adapter
⑩
(⌦L)
‧ 2 × clamping ring
⑨
(⌦L)
‧ 2 × holder for mounting the LED light underneath the sockets
⑧
(⌦J)
‧ 2 × holder for mounting the LED light laterally next to the sockets
⑦
(⌦J)
DANGER! Electric shock!
▶ Before all assembly work, remove the mains plug of the lighting unit and or cover.
▶ Keep the lighting unit or cover disconnected from the mains!
▶ Secure the mains plug of the lighting unit or cover against any unintentional connection to the socket
With the holder for mounting underneath the sockets, the minimum distance of 15 mm from the
underside of the LED light to the water surface may not be able to be adhered to, depending on the
aquarium. If this is the case, use the holder for lateral mounting
⑦
(⌦J).
1. Push the correct holder until it locks onto the LED light (⌦K).
2. Push the clamping ring
⑨
and the T5 or T8 adapter
⑩
together until they lock onto the holder
bracket (⌦L).
3. Loosen the end cap
⑪
and remove the fluorescent bulb.
4. Insert the LED light with the T5/T8 adapter into the lamp socket
⑫
via the end cap
(⌦M).
5. Screw down the end cap (⌦N).
Maintenance
CAUTION! Material damage.
▶ Do not use hard objects or aggressive cleaning agents for cleaning.
▶ Before cleaning, allow the LED light to cool down for 5-10 minutes.
Cleaning the LED light
1. Disconnect the light from the power supply
2. Allow the LED light to cool down for least 5-10 minutes.
3. When required, clean the LED light with a soft, damp cloth.
Technical data
Spare parts
Содержание 4200130
