4
2.3 Initial Inspection of Material List
The system components supplied with your Eguana Evolve™
Energy Storage system are shown below. Each
component should be inspected visually for any damage that may have been caused by shipment. If damage is
present, please contact your local distributor.
2.4 Special Tools & Hardware
In addition to standard tools, the following tools
and hardware should be readily available for the
installation.
•
Torque wrench
•
17mm socket wrench (battery negative
main power connection).
•
10mm socket wrench (b/- module
power connections).
•
3/8” socket wrench (battery positive main
power connection).
•
RJ-45 crimp tool (EMS to PCS
communication cable) and RJ-45
connectors.
•
M8 mounting hardware for wall bracket
(load bearing).
2.5 Inverter/DSP Firmware Version
The Inverter/DSP firmware version is displayed
within the equipment device menu of the SwitchDin Smart Energy application, available both in IOS and
Android. Open the application, then proceed to:
Unit >> Equipment (Devices) >> EguanaPCS >> Information: PCS. Field = Inverter/DSP Firmware version.
Item
Description
1
ACB05-LP PCS cabinet
2
ACB05-LB Master battery cabinet
3
Energy meter
4
Current transformer(s)
5
Wall bracket
6
BMS – PCS high level communication
cable
7
PCS and battery cabinet levelling brackets
8
Cabinet coupler plates
9
Cabinet coupler gasket
Cabinet coupler hardware (not shown)
4 ea M4 bolts
4 ea M4 star washers
4 ea M4 lock nuts
1
2
3
4
5
6
7
8
9
x2
x2
x3 (3Ø)