Secure the flare using previously removed screw and
scrivet as shown.
Fit the bumper flare to the vehicle as shown.
19
20
21
Ensure that flares are aligned. Remove the tape liner.
Apply firm pressure on the flare to ensure the tape is
contacting the vehicle surface around the full perimeter of
the flares.
FOR THE LHS FRONT FENDER FLARE
INSTALLATION REPEAT STEPS 1 TO 21
FENDER FLARES INSTALLATION INSTRUCTIONS
FF935
24/05/19
Page 5 of 7
22
LHS SHOWN
CONTINUE WITH STEP 22 FOR THE REAR
LHS FENDER FLARE INSTALLATION
Wash the areas of contact on the vehicle and wipe dry.
Wipe the fender where the flare will contact, using provided
Alcohol wipes.
x1
x1
x1
