FENDER FLARES INSTALLATION INSTRUCTIONS
FF935
24/05/19
Page 3 of 7
9
11
12
Remove and retain screw and scrivet from the wheel arch
on the front bumper. Remove and retain the Hex head
screw located under the bumper.
x1
x1
x1
Fit the Mud Flap to the Fender Flare aligning with all the
holes. Mark and drill a 10.5mm hole in the liner for the
bottom scrivet as shown.
7
Prepare the Front Mud Flaps by cleaning them & covering
the marked areas with masking tape.
FRONT-LEFT
FRONT-RIGHT
FRONT-RHS MUD FLAP
8
Measure and mark Mud Flap area to be removed, as
shown. Using tin snips remove the white area. Repeat for
the LHS Mud Flap. Remove all the masking tape.
REMOVE
MATERIAL
38mm
51mm
10
Fit the Mud Flaps to the Fender Flare and
secure with (5)
6mm Plastic Scrivets. Secure the bottom part of the mud flap
with one 10mm Plastic Scrivet and place the 5mm spacer
behind the Mud Flap.
+
10mm
Ø10.5mm
12
14
15
44mm
35mm
3mm
Important
FOR VEHICLES
WITH ACTIVE PARK ASSIST
CONTINUE TO STEP 13.
Important
FOR ALL OTHER VEHICLES
SKIP TO STEP 17.
