FENDER FLARES
INSTALLATION INSTRUCTIONS
COMPONENTS LIST
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
7
1
1
1
1
1
1
20
12
4
2
4
16
1
4
4
1
1
2
2
Front LHS Fender Flare
Front RHS Fender Flare
Front LHS Bumper Flare
Front RHS Bumper Flare
Rear LHS Fender Flare
Rear RHS Fender Flare
Screw 25mm
Speed Clip 8.5mm hole centre
Speed Clip 11mm hole centre
Phillips Head Screw
Alcohol Wipe
6mm Plastic Scrivet
Rust Inhibitor
10mm Plastic Scrivet
5mm Spacer
Sensor Blanking Molding LHS
Sensor Blanking Molding RHS
Star Washer
Blanking Plate
COMPONENT
QTY
NOTES:
• Ensure that both left and right hand Fender Flares suit the profile of the vehicle. Note the areas where the Fender Flares come
in contact with the vehicle.
• Before fitting Fender Flares remove any mouldings, strips or existing flares from the wheel arch. If there is a body side moulding,
mark where the moulding is to be cut, alternatively the Fender Flares can be cut to go around the moulding. Be sure to allow
enough room for the extrusion.
• Read instructions carefully. This product must be installed exactly as specified in these instructions.
Failure to do so may result in improper fit and/or retention.
• Short Phillips head Screwdriver
• Flat head Screwdriver
• Drill & 8mm & 10.5mm Drill Bit
• Steel Ruler
• Tin Snips
• 7mm,8mm & 10mm Socket or Spanner
• Masking Tape
• Mild Soapy Water & Clean Cloths
• Felt Tip Marker
• Utility Knife
Page 1 of 7
FF935
24/05/19
TOOLS REQUIRED:
1
2
3
4
5
6
8
9
10
11
FORD PX3 RANGER 2019MY-
12
13
14
15
16
17
18
19
Rust
Inhibitor
AUTOMOTIVE
SURFACE CLEANER
IMPREGNATED WITH 70% ISOPROPYL
ALCOHOL
For use in cleaning painted metal,
glass and other vehicle surfaces.
For external use only
.
Dispose of properly after use.
LH
RH
