EGO TS
Coupling
5.8.2
As long as no device is connected, the system is visible for all Bluetooth
-
®
devices.
The device to be used (mobile phone, PDA, etc.) must be logged in to the system.
-
The Bluetooth
®
search and coupling are carried out by the device.
The name of the system is EGO TS.
The PIN has a default setting of 0000.
-
Bei erfolgreicher Verbindung/Kopplung leuchten beide LED‘s dauerhaft.
-
It can be 8 Bluetooth
-
®
phones be connected.
Automatic coupling
5.8.3
If a phone is already connected with the system, the EGO TS tries to couple to this phone. When
a connection has been successfully made, the two LEDs are permanently on. The connection is
always made to the most recently coupled phone. If this phone is out of range, the system will
search for other phones registered in the system. When the search is successful, the connection
to this phone is completed automatically. If the search process was unsuccessful, the system
reverts to the coupling mode. This enables manual connection from the phone.
LED status
5.8.4
Green blinks in short intervals → no device connected
-
Both permanently on → device is connected
-
Red on and green blinks periodically → active call
-
