Functional Test
5.6
An operational test is only possible after coupling the system with a Bluetooth
®
- compatible
device. The procedure is explained in the sections „5.8. Getting started“.
Symbols
5.7
The control console of the EGO TS has a total of 4 keys. The illustration on the right shows an
overview of the key locations. The functions of the individual keys are explained in the following
section.
Key functions
5.7.1
→ The
-key (green) is for accepting calls. It also controls the redial function,
private mode and connect manually.
→ The
-key (red) is used for rejecting incoming calls and ending completed calls
(hang-up). It also controls the starts the phone‘s voice dialling function.
→ The
-key increases the volume in phone.
→ The
-key decreases the volume in phone.
Getting started
5.8
Take enough time to familiarise yourself with the use of the system in combination with your
phone. First of all, make a few calls to determine the ideal volume and the best voice pick-up di-
rection before using the system in traffic. The best way of optimising conditions of use is to park
your car in a quiet place especially for this purpose. It is also helpful if another phone user can
take some time to assist you when making test calls.
On / Off function
5.8.1
Turning the ignition key simultaneously activates the hands-free system. Immediately after the
system is activated, the two LEDs blink 4 times. This indicates that the system is in standby
mode and ready to make a connection. In order to use the system for phone calls, a Bluetooth
®
compatible phone must be coupled to the EGO TS system. How this is done is explained in detail
in the following sections. When the ignition is turned off, the hands-free system also shuts
down. If the ignition is turned off during a call, phone ability is maintained and the system is shut
down only after the call has been completed.
14
|
15
