EGO BCX3800, Руководство оператора

Страница: 11 / 244

56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BCX3800
11
EN
WARNING:
When servicing, use only identical
replacement parts. Use of any other parts may create a
hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified
service technician.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean clothes to remove dirt, dust, oil, grease, etc.
CLEAN THE MACHINE
◾
After each use of 3-teeth blade / trimmer head, clean
the debris, clogged soils or grass on the blade and
guard with a soft brush.
NOTICE:
When the line-cutting blade becomes dull, please
sharpen it performed by a qualified service technician or
replace with a new line-cutting blade as necessary.
◾
After each use of brush cutter, clean the cutting unit
using a damp cloth with a mild detergent.
◾
Do not use any strong detergents on the plastic housing
or the handle. They can be damaged by certain aromatic
oils, such as pine and lemon, and by solvents such as
kerosene. Moisture can also cause a shock hazard. Wipe
off any moisture with a soft dry cloth.
◾
Use a small brush or a small vacuum cleaner to clean
the air vents on the rear housing.
LUBRICATE THE GEAR CASE
For best operation and longer lifetime, lubricate the gear
case with a special grease (4-5g each time) after every
50 hours operation.
The special grease should meet the following requirements.
1. Belong to DIN51818: NLGI-1 cone penetration degree.
2. Ester base grease.
3. Excellent low-temperature startup, EP, mechanical
shearing, abrasion resistance and oxidative stability
properties.
4. Operation temperature must contain -40~180°C.
Remove the battery plug and the sealing screw. Lubricating
the gear case through the oil-hole.
WARNING:
Do not lubricate while the brush cutter is
still connected with battery or running.
STORING THE MACHINE
◾
Remove the battery pack from the tool.
◾
Wear heavy gloves to clean the tool thoroughly.
◾
Mount the blade sheath onto the 3-teeth blade for safe
saving (Fig. N).
◾
Store the unit in a dry, well-ventilated area, locked-up
or up high, out of the reach of children. Do not store
the machine on or adjacent to fertilizers, gasoline, or
other chemicals.
NOTICE:
Do not operate your hedge trimmer with dull or
damaged cutting blades. This may cause overload and
will give unsatisfactory cutting results.
Protecting the environment
Do not dispose of electrical equipment,
used battery and charger into household
waste! Take this product to an authorized
recycler and make it available for eparate
collection. Electric tools must be returned
to an environmentally compatible recycling
facility.