56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2120AP/SNT2120AP-FC
35
PROBLEM
CAUSE
SOLUTION
After passing,
the snow blower
leaves a layer
of snow on the
ground.
◾
The scraper bar is worn.
◾
Replace the scraper following
the section “
REPLACING THE
SCRAPER BAR
” in this manual.
The snow blower
throws less snow.
◾
The rubber paddles are worn.
◾
Replace the rubber paddles
following the section “
TO
REPLACE THE RUBBER
PADDLES
” in this manual.
◾
Auger speed may be too low.
◾
Increase the auger speed.
The auger fails to
get traction and
it requires extra
effort to push the
snow blower
forward.
◾
The rubber augers are worn.
◾
Replace the rubber augers
following the section “
TO
REPLACE RUBBER AUGERS
” in
this manual.
The grip area fails
to be heated.
◾
The heating function will turn
off automatically when the
snow blower is inactive for 10
minutes.
◾
P
ress the grip-heating switch to
restart the heating.