56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2120AP/SNT2120AP-FC
23
1. To increase the distance that the snow thrown, squeeze the trigger on the chute-
deflector handle, and then raise the chute deflector. Release the trigger on the
chute-deflector handle to lock the chute deflector in place (Fig. 18).
2. To decrease the distance that the snow is thrown, simply lower the deflector with
the chute-deflector handle.
WARNING:
Do not force the chute so far forward that a gap appears between
the deflector and the chute itself. Snow or other debris could be thrown through the
gap and back at the operator, resulting in serious personal injury.
CLEARING A CLOGGED CHUTE
WARNING:
Hands coming in contact with the rotating auger inside the chute is
the most common cause of injury associated with snow blowers. Never use your hand
to clean out the chute.
To clear the chute:
1. Shut the motor and auger off!
2. Remove the battery pack(s) from the snow blower.
3. Wait 10 seconds to be sure the auger has stopped rotating.
4. Always use a clean-out tool, such as a wooden rod or other clearing tools that are
commercially available; do not use your hand.
POWER INDICATOR ON THE
SNOW BLOWER (Fig. 19)
The snow blower features a power
indicator to communicate the charge level
of the battery pack(s) and the working
status of the snow blower. The power
indicator will illuminate only when the
snow blower is started.
19
Power Indicator
