manualshive.com logo in svg

Egholm City Ranger 2200, Руководство оператора, Страница: 9 / 28

Поделиться
Скачать
Egholm City Ranger 2200 Скачать руководство пользователя страница 9

1

2

4

9

2.2 Attaching the hopper

1. Reverse the machine up to the hopper on the frame.

2. Stop the machine.

3. Check that the locking handle is in the unlocked 
position. The hooks should be in the same position as 
illustrated. (Picture 1)

4. Check that the hydraulic couplings are clean. If 
necessary, clean the couplings with a dry cloth. (Picture 2)

5. Lift the hopper over the loading deck until you feel 
resistance. The hopper must be centred over the machine.

6. Push lever down. Note: there are two levels. Push the 
locking pin free from the barb and lower the hopper to 
level 1. (Picture 3)

Push the lever to level 2, push down, then push the locking 
pin away from the barb (Picture 4) and lower the hopper 
slowly down over the machine.

Operator’s manual

Operator’s Manual City Ranger 2200 Grass Collector

3

Attaching the hopper

                      Locking pin      Lever

                   

             Locking lever – unlocked

Cleaning couplings

Содержание City Ranger 2200





























Отзывы:

Нет отзывов