1
2
3
4
13
Operator’s manual
Operator’s Manual City Ranger 2200 Grass Collector
2.5 Emptying the hopper
When the hopper is full, suction stops.
Grass clippings can either be emptied onto the ground or
into a container.
Tipping height is variably adjustable from 575–1,860 mm.
NB!
Before emptying the hopper, make sure that:
a) The machine is on a level surface and that it is not
“angled”.
b) there is sufficient space to open the rear cover.
1. Stop PTO front and rear. (Picture 1)
2. Drive to disposal area.
3. To empty without high tipping:
The “Water Front” contact must be switched ON.
(Picture 2)
Start emptying by raising the lower joystick. The hopper
begins to tip.
Note that the rear cover opens automatically when the
hopper is tipped at an angle of about 30°. (Picture 3)
4. To empty with high tipping:
The “Water Front” contact must be switched OFF.
(Picture 2)
Start raising the hopper by raising the lower joystick.
When the hopper has reached the correct height, start to
empty it.
The “Water Front” contact must now be switched ON.
(Picture 2)
Start emptying by raising the lower joystick, the hopper
begins to tip.
Note that the rear cover opens automatically when the
hopper is tipped at an angle of about 30°. (Picture 4)
PTO front PTO rear
Manual start
Water Front ON OFF
The hopper is tipped back as far as possible
The hopper is raised to max. height and tipped as far
back as possible.