manualshive.com logo in svg

Eggtimer Rocketry Eggtimer, Руководство пользователя, Страница: 47 / 56

Поделиться
Скачать
Eggtimer Rocketry Eggtimer Скачать руководство пользователя страница 47

 

- 47 - 

 

Appendix C - Sample Flight Settings 

 
Low-to-Medium Power Non-Deployment Example 

 
These settings will work fine for a small D-size rocket, or most E-G rockets.  If the rocket is 
heavy, you might want to take the Ascent sample rate down a notch, to 5. 

 

Eggtimer Build_1.48b              Flight Settings 
                                                                T:23.50 
    A    100   LDA <50-500 by 50>                               P:97804.00 
    B    8     Ascent Samp/sec:  <4,5,8,10,15,20,25,33>         A:975.39 
         125   Interval (ms)                                    Main:0 
    C    2     Descent Samples/sec <1,2,4,5,10>                 CHB:0 
         500   Interval (ms)                                    Batt:3.12 
    D    0     Main Mode <0-Off, 1-Igniter, 2-Servo CCW, 3-Servo CW> 
    E    300   Main Altitude <100-2000 by 50, 0 @ Apogee> 
    F    2     Main ON-Time <1-9,0-Cont.> 
    G    0     CHB Mode <0-Off, 1-Igniter, 2-Servo CCW, 3-Servo CW, 
                         4-Airstart, 5-Airstart w/o Breakwire,6-Delay> 
    H    2     CHB ON-Time <1-9,0-Cont.> 
    I    2000  Burn Timer <100-20000 ms by 100> 
    J    0     Airstart/Delay <0-9900 ms by 100> 
    K    0     Airstart Min Velocity <0-700 by 50> 
    L    0     Telemetry 
 
    O          Comments:    MPR non-deployment example 
 
 
                   Options: Esc, A-O, ?

            

 

 

 

Low-Medium Power Multiple Deployment Example (Using Motor’s Ejection) 

 
If you add multiple deployment to the example above, you probably don’t need to change the 
sample settings, but you obviously will need to set the deployment options.  This example 
deploys the main chute at 300 feet, and fires for 2 seconds.  The motor’s ejection fires the 
drogue, so you don’t need to set Channel B. 
 

Eggtimer Build_1.48              Flight Settings 
                                                                T:23.50 
    A    100   LDA <50-500 by 50>                               P:97804.00 
    B    8     Ascent Samp/sec:  <4,5,8,10,15,20,25,33>         A:975.39 
         125   Interval (ms)                                    Main:0 
    C    2     Descent Samples/sec <1,2,4,5,10>                 CHB:0 
         500   Interval (ms)                                    Batt:3.12 
    D    1     Main Mode <0-Off, 1-Igniter, 2-Servo CCW, 3-Servo CW> 
    E    300   Main Altitude <100-2000 by 50, 0 @ Apogee> 
    F    2     Main ON-Time <1-9,0-Cont.> 
    G    0     CHB Mode <0-Off, 1-Igniter, 2-Servo CCW, 3-Servo CW, 
                         4-Airstart, 5-Airstart w/o Breakwire,6-Delay> 
    H    2     CHB ON-Time <1-9,0-Cont.> 
    I    2     Burn Timer <100-20000 ms by 100> 
    J    0     Airstart/Delay <0-9900 ms by 100> 
    K    0     Airstart Min Velocity <0-700 by 50> 
    L    0     Telemetry 
 
 
    O          Comments:    MPR multiple deployment 
        
 
 
 
                   Options: Esc, A-O, ?

            

 

Содержание Eggtimer

























































Отзывы:

Нет отзывов