EGAmaster 56095, Руководство по эксплуатации

Страница: 20 / 38

20
SPECIFICATIONS
Model N
o
.
Max. Torque
(N-m)
Square Drive
(inches)
Torque
Measuring
Range (N-m)
Length (mm)
56095 30 1/4 1.5~30 390
56096 135 3/8 6.8~135 415
56097 200 1/2 10~200 530
56098 340 1/2 17~340 650
All Models
Data memory size
CW:
±1%
CCW:
±
2%
PC Connectivity *2 250
Operation Mode *3 Yes
Torque display
M1 - QC mode
M2 - torque mode
(M2 mode) *4 Peak hold / Track
Bright LED
12LEDs
(2 Red + 10 Green)
Unit Selection N-m, ft-lb, in-lb, kg-cm
Head Type Lever Type Ratchet
Gear Teeth 36
Battery AA x 2
Operating Temperature -10ºC~60ºC
Storage Temperature -20ºC~70ºC
Humidity Up to 90% non-condensing
Drop Test 1 m
Vibration Test *5 10G
Environmental test *6 Pass
Electromagnetic compatibility test *7 Pass
NOTE: Accuracy is guaranteed from 20% to 100% full scale.
Note:
*1: The accuracy of the readout is guaranteed from 20% to 100% of maximum range + /- 1
increment. Calibration point is at the middle line of black circle area on the rubber handle. For
maintaining accuracy, calibrate the wrench at regular intervals (1 year recommended).
*2: Use a special designed cable (accessory) to upload record data to PC.
*3: M1 mode (for a normal bolt retightening checking).
M2 peak-hold mode (for the bolts its length is unusual longer or needs an extension bar).
*4: For torque calibration, please set at M2 track mode.
*5: Horizontal and vertical test.
*6: Environmental test: