Ega Master 79607, Руководство по эксплуатации

Страница: 8 / 22

8
Pay attention that the circlip locks in the groove of the tool. Only use tools with suitable shank
(see “Technical Specification).
Remove tool
Pull the tool from the tool holder. Stucking tools can be loosened by slight beats with a rubber
hammer.
Change tools
When inserting a tool, pay attention that it is properly seated on the tool holder.
If the tool is not firmly fixed to the tool holder, it can unscrew and cannot be controlled
anymore.
Before each operation, make visual check of the machine and machine tools, as well as
accessories with regard to integrity and appropriateness for the application.
Never operate the machine if one or more parts (e. g. machine tools, cables, lines) are damaged,
if it is not working properly, if any damages can be identified or are to be suspected (e. g. after it
has been dropped).Replace damaged parts immediately.
Never remove protective devices from the machines where fitted.
Ensure they are in good condition and properly adjusted before starting the machine.
A malfunction, which impairs operator safety, must be immediately removed.
Pay attention that the machine is cleaned from dust and deposits of rust particles and other
deposits before and after the work.
Torques
The torque adjustment is done via the air pressure.
3 bar 3,5 bar 4 bar 5 bar 6 bar
Setting Md n Md n Md n Md n Md n
1
175 3 250 3 275 4 300 5 325 5
2
275 6 325 6 350 6 450 7 500 7
3 400 7 475 7 550 8 700 10 700 10
4
500 8 550 8 650 10 750 12 750 12
The torque values are guide values only, they depend basically on the application, the flow
pressure and the applied accessories.
BASIC SAFETY INSTRUCTIONS
Read operation instructions/safety instructions!
Before working on or with the tool, read the safety instructions and follow the
instructionsduring operation.
Do not modify machine or machine tools and accessories after receipt. Permission from the
manufacturer must be obtained before any modifications or alterations are done in compliance with
all safety instructions. Use the machine only for its intended use. Observe the technical data of the
equipment and the ambient temperatures. Pay attention to labels, restrictions of use and special
instruction notes on the machine tools and the machine itself. Regularly check that the type plate
and symbols on the machine are legible.