
18
TROUBLESHOOTING
In case of malfunctions check, if the instructions of this technical documentation are adhered to
and make necessary adjustments.The following table shows possible problems and causes:
Problem, cause, remedy
Problem
Cause
Remedy
a
Machine does not start
not connected to pneumatic
supply
Connecting and opening of
the pneumatic line
b
Machine turns too slowly
too low operation pressure
increase operation pressure
at the machine to 6 bar
c
Gear makes strong noise
Contact authorized expert
company
d
Other trouble
Contact authorized expert
company
If necessary, send the machine to the manufacturer
WARRANTY AND LIABILITY
Unless otherwise specified, our “General Sales Terms” apply.
Warranty and liability claims in regards to persons or equipment damages are invalid, if one or
several of the following causes apply:
· Improper use of the machine.
· Improper assembly, startup, operation or maintenance of the machine.
· Operation of the machine with defect safety devices or improperly fixed or non-functioning
safety and protection devices.
· Non-observance of the instructions in the operating instruction booklet concerning transport,
storage, assembly, startup, operation, maintenance and setting up of the machine.
· Independent structural alterations or settings on the machine beyond the intended purpose
· Inadequate supervision of wear parts.
· Improperly carried out repairs, inspections or maintenance
· Catastrophic cases because of a war, acts of god or other reasons which are beyond our control.
SCOPE OF DELIVERY
Check, if the scope of delivery is complete:
1 Operation and maintenance manual.
1 Pneumatic impact wrench.
Содержание 79607
