EG Homevent VIGO 550A, Инструкция по установке и обслуживанию

Страница: 16 / 28

16.
It allows to select one language among English, Italiano, Deutsch,
Č
eština, Slovenský, Français,
Español, Nederlandse,
中国
, Magyar and
Русский
.
Press OK to enter.
Select the language using

or

.
Press OK to select.
Factory setting (DEFAULT): English.
Installer Menu
1 Language
2 Date/time
3 Machine orientation
4 Normal Mode
6 Bypass settings
It allows to set the date and the time.
Press OK to enter.
Select the item using

or

and press OK.
Set the date and the time using

or

and press OK to confirm.
Press ESC to go back to the previous menu.
Installer Menu
1 Language
2 Date/time
3 Machine orientation
4 Normal Mode
6 Bypass settings
It allows to select the orientation of the duct connections from and to outside (LEFT or RIGHT hand
configuration as per § 3.3).
Press OK to enter.
Choose “Left” or “Right” using  or  .
Press OK to select.
Factory setting (DEFAULT): Left.
Installer Menu
1 Language
2 Date/time
3 Machine orientation
4 Normal Mode
6 Bypass settings
It allows to select the orientation of the duct connections from and to outside (LEFT or RIGHT hand
configuration as per § 3.3).
Press OK to enter.
Choose “Left” or “Right” using

or

.
Press OK to select.
Factory setting (DEFAULT): Left.
Installer Menu
1 Language
2 Date/time
3 Machine orientation
4 Normal Mode
6 Bypass settings
Installer Menu
1 Language
2 Date/time
3 Machine orientation
4 Normal Mode
6 Bypass settings
It allows to select one operation among Normal Mode 3V, Slave or Constant Pressure.
Press OK to enter.
Choose the operation mode using  or  . Press OK to select.
Factory setting (DEFAULT): 3V
3V Mode
To adjust the speeds, refer to the paragraph “10 Speed setting” in the Installer Menu.
Slave Mode
It allows to control the speed by means of the 0-10V analogic input: any other operation logic is
ignored.
If the Slave mode is activated, the icon and the word Slave are displayed.
Constant Pressure Mode
Currently not available.