EFX
(Entertainment FX)
OPERATION:
To fill the machine use a paper confetti this can be added by sliding the grille to one side
and then fill the confetti bowl (as shown in figure 2).
Fix the Confetti Canon in the ceiling of your venue using the bracket (5) and the neces-
sary hook clamp (not supplied). Always ensure a secondary fixing such as a safety chain
(not supplied) is attached to the safety ring (7). Once installed run your power lead and
DMX cable if operating using DMX.
MANUAL OPERATION
The machine can operate on either manual mode or DMX, to operate the machine manu-
ally you simply press “Manual” and “Enter” at the same time, this will start the machine,
to stop the machine press the “Manual” and “Enter” buttons together again. You can set
this operation on the machine and then simply switch the mains power on and off.
DMX OPERATION
1.
Set the DMX address using the Up and Down keys on the Digital Display
(2)
2.
The unit uses a single channel of DMX and once set can be operated from a simple DMX desk in
either an “On” or “Off” mode .
When operating the machine at a height of 10metres the spread of the confetti will be approximately
80m2.
To empty the machine will take approximately 5 seconds.
