![background image](http://html1.mh-extra.com/html/efka/ab620a5035/ab620a5035_operating-manual_2367399017.webp)
- AB620A5035
- 17 -
6
Setting the Basic Functions
6.1 Direction of motor rotation
Function
with
or
without
control panel
Parameters
Direction of motor rotation
(drE)
161
161 =0
Clockwise motor rotation (look at the motor shaft)
161 =1
Counterclockwise motor rotation
A
TTENTION
If the motor is mounted differently, e. g. at a different angle or with gear, make sure that the
value set using parameter
161
corresponds to the direction of rotation.
6.2 Use of a HSM001 Hall Sensor Module or IPG... Pulse Encoder
Representation and installation of a HSM001 Hall sensor module or IPG... pulse encoder !
Representation and installation of a HSM001 Hall sensor module or PG... pulse encoder together with a
LSM002 light barrier module by means of adapter cord no. 1113229 !
Operation with HSM001 Hall sensor module
Operation with IPG... pulse encoder
- Get machine to the needle-up position.
- Position bore for magnet such that the magnet is located
approx. 15° after the sensor in the sense of rotation.
- Get machine to the needle-up position.
- Turn disk in the pulse encoder such that the leading edge
will be located approx. 15° after the sensor on the board
in the sense of rotation.
Содержание AB620A5035
