EFILive CM2350B, Руководство пользователя

Страница: 9 / 25

Cummins 6.7L CM2350B CSP5 User Guide
support@efilive.com
- 7 -
www.efilive.com
CSP
5
Upgrade
CSP
5
Upgrade Checklist
CSP
5
upgrades are only available on specific factory operating systems. Typically
these are based on the latest factory update (at time of development). If you have
a truck that has an OS not listed below, you will need to upgrade your base file
first.
Supported CSP
5
operating systems are listed in the table below. These were the
latest factory updates as of early 2018; released 7 years after this ECM type was
introduced.
EFILive will not be offering CSP on older, obscure or obsolete OS's. No further
EFILive development is scheduled for the Dodge Cummins CME platform.
CSP
4
Operating System - Pickup
32130601 32150101 32180100
32130902 32150102 32180101
32140204 32150200 33140100
32140305 32160202 34140100
32140602 32170403
32150101 32170404
CSP
4
Operating System - Cab & Chassis
31130501 51140302 51150102
Where a vehicle has been previously tuned with a product other than EFILive, the
conversion process may fail and render the ECM non-functional and not
recoverable.
EFILive recommends users source a good known base file for CSP
5
.
To upgrade to CSP
5
exclusively in EFILive V8 Scan and Tune software you must
be running the following (or higher) software versions.
1. EFILive V8.3.5 or later.
2. FlashScan V3 / AutoCal V3 Firmware
– V3.00.060.
3. FlashScan V2 / AutoCal V2 Firmware - V2.08.170.
The latest software versions are available for download from EFILive's website.
Upgrade Operating System to CSP
5
1. Open V8 Scan and Tune software and your stock tune file.
2. Navigate to [F5: Edit].