Accessing the configuration settings
After initial setup, we recommend that you review the PS-17 configuration to make sure the settings are optimized
for your network and print environment.
When to review the configuration settings
We recommend reviewing the PS-17 settings in the following situations:
•
After initial setup
•
If the PS-17 system software is installed or re-installed
•
If the network or print environment changes
Viewing and modifying the configuration settings
You can view and modify the PS-17 configuration settings through the following methods:
•
The PS-17 Setup feature on the printer control panel:
The Setup feature provides access to a partial set of the configuration settings.
•
The
Configure
tool in Command WorkStation:
There are two methods of access:
•
In
Device Center
, select
General Info
, then click
Configure
in the lower right corner.
•
From the menu bar, select
Server
>
Configure
.
•
The Configure tool in WebTools:
To access, click the
Configure
tab.
In the
Configure
tool (referred to as Configure), you can find settings quickly by typing keywords into the Search bar
at the top.
You can also view the configuration settings as follows:
•
By saving the configuration settings as a file (see
Saving the configuration settings as a file
on page 24).
•
By printing the configuration settings (see
on page 25).
For a description of all the configuration settings, see
Configure Help
.
Configuration and Setup
Accessing the configuration settings
23
