R
EPLACING
PARTS
43
Opening the E-42
To service internal components, open the E-42 as described in the following procedure.
• The E-42 weighs approximately 20Kg. Be careful when moving the device.
• Never lift the E-42 by grasping the top panel. The top panel does not support the weight of
the system.
A
VERTISSEMENT
:
Ne jamais soulever le serveur d'impression par sa partie supérieure : celle-ci ne peut pas supporter le
poids du système.
A
VVERTENZA
:
Il server di stampa non deve essere mai sollevato afferrandolo dal pannello superiore, in quanto
quest'ultimo non può sostenere il peso dell'intero sistema.
W
ARNUNG
:
Heben Sie den Druckserver nicht an der oberen Gehäuseabdeckung an. Die obere Gehäuseabdeckung ist
nicht dafür ausgelegt, das Gesamtgewicht des Systems zu tragen.
A
DVERTENCIA
:
No levante nunca el servidor de impresión agarrándolo por el panel superior. El panel superior no
soporta el peso del sistema.
A
VISO
:
Nunca erga o servidor de impressão pelo painel superior. O painel superior não suporta o peso do sistema.
W
AARSCHUWING
:
Til de afdrukserver nooit op door het bovenpaneel vast te nemen. Het bovenpaneel kan het gewicht
van het systeem niet dragen.
T
O
OPEN
THE
E-42
1 Shut down the E-42 (see
).
2 Remove all cables from the back of the E-42.
3 Remove the E-42 from the furniture (see
).
4 Remove all panels necessary to access the component that you need to service.
For guidelines on which panels to remove, see the service procedure for the component that
you want to access.
N
OTE
:
When removing multiple panels from the E-42, use the following order:
• Left panel (see
• Right panel (see
• Front panel (see
)
N
OTE
:
When replacing panels, reverse the order.
5 Place the E-42 on a flat surface. Attach an ESD wrist strap before handling internal parts (see
6 Carefully position the E-42 so that it is resting on its side and the internal components are
facing up.
Place removed components on a grounded, antistatic surface.
