effeff 495-107, Руководство по эксплуатации

Страница: 9 / 24

9
Batteries to choose from
9 volt lithium battery block (operating life approx. 2 year)
9 volt standard battery block (operating life approx. 1 year)
9 volt accumulator block
Functional testing
L L
Switching-on of operational standby mode by actuating the key “
E
” on
the membrane keypad.
The green LED indicator will flash on briefly twice, indicating entry
standby.
L L
Enter code number “
O
” (original ex-works setting, also after an
equipment reset).
L L
The door handle is engaged for actuation for 3 seconds (in order to
open the door). During the door unlocking period the door handle can
be actuated only once.
If the door unlocking period of 3 seconds has expired without the door
having been opened, the door handle disengages (freerun).
L L
If the code lock does not function properly subsequent to
programming or a battery change, the battery clip has to be
disconnected from the battery again for a short while (brief interruption
of the power supply).
If this proves to be unsuccessful,
see Error reset.
Programming with time limit
Please pay attention when programming codes into the system only 5
sec. is allowed between pressing (entering) each digit. Failure to
observe this will mean that you have to start your programming again
from the beginning.
Initial programming of the master code or reinitaline master code
after a reset.
L L
Switching-on of operational standby mode by actuating the key “
E
” on
the membrane keypad.
The green LED indicator will flash on briefly twice, indicating entry
standby.
L L
Enter initialisation code “
O
”.
L L
Switch on programming mode by pressing the key “
P
”.
Enter the mastercode (programming code) with a minimum of 2 and
maximum number of 6 digits.
L L
Confirm entry by pressing the key “
P
”.
Example:
E O P 1234 P
= mastercode E 1234