manualshive.com logo in svg

Effecta Smart 40, Установка, обслуживание, сервис, сборка., Страница: 21 / 43

Поделиться
Скачать
Effecta Smart 40 Скачать руководство пользователя страница 21

21

Effecta AB - Västra Rågdalsvägen 21 - 434 99 Kungsbacka - 0300 - 22320 - [email protected]

▀  

Example of curves

A too low heating curve will result in that the house will not have the correct indoor

temperature.

 

-25         -15           -5             5          15          25            30           40          50          60          70          80

180

160

140

120

105 

85

70

Temperature 

flow

Slope

The heating curve chosen in the software is the temperature
to the flow at 10˚F outdoor temperature. Therefore the flow
temperature will change with the outdoor temperature.

Outdoor temperature

Outdoor temperature

Temperature 

flow

Adjustment

Slope 120°F adju 10°F.

Slope 120°F without adjustment.

If it is cold outdoors (cold winter) and the room temperature is too low. Increase the 
slope with 2-4˚F.

If it is cold outdoors (cold winter) and the room temperature is too high. Decrease 
the slope with 2-4˚F.

If it is warm outdoors (average autumn/spring) and the indoor temperature is too 
low. Increase the adjustment with 2-4˚F.

If it is warm outdoors (average autumn/spring) and the indoor temperature is too high.
Decrease the adjustment with 2-4˚F.

Wait at least 24 hours between adjustments and changes due to slow response of 
heating.

When a adjustment of 10˚F is done, the heating curve is
adjusted at all outdoor temperature with 10˚F.

180

160

140

120

105 

85

70

-25         -15           -5             5          15          25            30           40          50          60          70          80

Содержание Smart 40












































Отзывы:

Нет отзывов