5 / Setup
VALVEMATE
7040
➀
Mounting
Use the universal mounting bracket
(included) to mount the controller
either over or under the cabinet. The
bracket allows the controller to pivot
30º from a horizontal position. For
panel mounting, a panel mount
bracket kit is available (#7000PMK).
➁
Input Power
1. View cartridge window in power
cord receptacle to ensure that the
voltage is set properly. Selections
are 100, 120 or 220 VAC.
2. If it does not match, remove the
fuse cartridge. Then remove the
fuse holder from the cartridge,
rotate the holder and position the
correct voltage to show through
the cartridge window.
Reassemble in reverse order.
3. Connect the power cord.
Setup
Voltage value
Spare fuse
Cartridge window
(check voltage indicated)
220
120
10
0
➀