Efco TG 2600 XP Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 25

Efco TG 2600 XP Скачать руководство пользователя страница 24

TG 2600 XP - TG 2750 XP

ENGINE:
Displacement:

2.15 cu. in (24.5 cc)

Bore:

1.34 in (34 mm)

Stroke:

1.10 in (28 mm)

PERFORMANCE:
Idle Speed:

2,800 RPM

WOT (With Bar & Chain):

10,500 RPM

Power:

1.2 HP/0.9kW (7,500 RPM)

FUEL SYSTEMS:
Carburetor:

Multi Position Diaphragm

Fuel Tank Capacity:

20.3 oz. (600 ml)

Fuel Mix:

See Operation-Fueling Section

IGNITION SYSTEM:
Spark Plug:

Champion RCJ-6Y

Spark Plug Gap:

0.02 in. (0.5 mm)

CUTTING SYSTEM:
Blade pitch:

1.38 in. (35 mm)

Blade lenght:

23.6 in. (600 mm) (TG 2600 XP)
29.5 in. (750 mm) (TG 2750 XP)

24

STORAGE

TECHNICAL DATA

Storing Hedge Trimmer

WARNING: Stop engine and allow to cool, and secure the unit before storing or transporting in
a vehicle. Store unit and fuel in an area where fuel vapors cannot reach sparks or open flames
from water heaters, electric motors or switches, furnaces, etc. Store unit with all guards in place.
Position so that any sharp object cannot accidentally cause injury to a passersby. Store the unit
out of reach of children and other unauthorized persons.

1. Drain and clean the fuel tank in a well ventilated area.
2. Drain all fuel from tank into a container approved for gasoline. Run engine until it stops. This will remove all

fuel-oil mix which could become stale and leave varnish and gum in the fuel system.

3. Clean all foreign material from the hedge trimmer. Keep away from corrosive agents such as garden chemi-

cals and de-icing salts.

4. Abide by all Federal and local regulations for the safe storage and handling of gasoline. Excess fuel should

be used in other 2-cycle engine powered equipment.

5. Lubricate the blade bars with special grease before long periods of storage.

CAUTION: It is important to prevent gum deposits from forming in essential fuel system parts
such as the carburetor, fuel filter, fuel hose, or fuel tank during storage. Alcohol blended fuels
(called gasohol or E10 or using ethanol, methanol) can attract moisture which leads to fuel
mixture separation and formation of acids during storage. Acidic gas can damage the engine.

en

Efco TG2600 Inglese 29-03-2007 14:21 Pagina 24

«
...
22
23
24
25
»

Содержание TG 2600 XP


























Отзывы:

Нет отзывов