
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
18
MAYB PBL 1 - 160411
Assembly page 18/23
Fax +32 2 359 95 50
Note: To premature end or change the selected program press the cancel button (15). Now
another function can be selected and started.
Arrow Buttons (10+14)
Use the arrow buttons (10+14) to select the desired blending setting (1-9). Press the on/off
button (9) to start the blending. Use this function to chop or blend foods with no regard to the
pre-programmed functions.
Pulse Button (12)
After placing glass jar (2) and lid (1) correctly on top of each other and the major base (4) and
starting the appliance, you can use the pulse button (12). Press and hold the pulse switch as
long as desired. The blade will start to blend with the highest setting (9).
The pulse function can also be used for cleaning. Just put some water and, if necessary,
detergent into the glass jar (2) and press the pulse switch, to clean your appliance.
This function can also be used to further blend or grind the food ingredients if they are not small
enough after the pre-programmed function has ended. You can hold the pulse switch to
achieve the desired size of the ingredients.
Function Button (13)
Press the function button (13) repeatedly to choose among the 12 pre-programmed menu
functions in the function display (16). The selected function will blink. Simply press the on/off
button (9) to start the function.
Cancel Button (15)
Press the cancel button (15) to stop any running function or cancel your current selection. Use
the on/off switch (9) to shift the appliance to stand-by mode.
Note: The on/off button (9) cannot be used to prematurely end a program.
Preset Button (11)
Press the preset button (11) to select a starting time for any program. Use the arrow buttons
(10+14) to preset the starting time in 5 minute-steps between 5 minutes and 24 hours. This
function can be selected prior or after the function selection and has to be confirmed with the
on/off button (9). The pre-programmed function will automatically start as soon as the preset
time is over.
Function Display (16)
With the function display (16) you can select between 12 pre-programmed functions, using the
function button (13). The selected function starts to blink and the duration (8) (for all functions
without cooking) will be displayed on the right side.
Press the on/off button (9) to start the function or the cancel button (15) to stop it.