EFA Z140, Руководство по эксплуатации

Страница: 20 / 33

Schmid & Wezel
D 75433 Maulbronn Seite/ Page
2/ 15
Ausführung/ Version
05.2004
1.4 Accessories
„
Spring-loaded pulley
„
Hose kit
„
Hydraulic unit
„
Hydraulic fluid
For order numbers of standard equipment and
accessories, please refer to appendix A.2 "List of
Spare Parts and Wear Parts" (page 8).
2. Safety instructions
2.1 General safety instructions
When operating the hook cutter, always
adhere to the following safety instructions:
„
Before replacing the cutter blades, or carrying
out installation, maintenance or repair work,
disconnect the machine from the supply line.
„
Only personnel who have been properly trained
and instructed in the safe use of the hook cutter
may handle the tool.
„
All personnel working with the tool must be
instructed by our specialist technicians.
„
Installation, maintenance and repair work may
only be carried out by suitably trained and
authorised specialists technicians.
2.2 Workplace safety
1. Keep your workplace tidy. Untidiness may result
in accidents or damage.
2. Ensure that the workplace environment is
suitable for the use of the tool and properly
illuminated (min. 500 lux).
3. Prevent unauthorised persons from accessing
your workplace. Concentrate on your work and
use common sense. Do not handle the hook
cutter, if you feel tired and/or find it difficult to
concentrate.
4. Keep the hook cutter in a safe place. While not
in use, store it in a dry place.
5. Work clothing: Do not wear loose clothing or
jewellery, as such items could become
ensnarled in moving machine parts. Wear safety
footwear. Always wear a hairnet!
6. Avoid an unnatural posture. Make sure that you
stand firmly and do not lose your balance.
7. Handle your tools with care. Use only sharp and
undamaged cutter blades to ensure safe and
efficient working.
8. Use only original EFA blades. Always adhere to
the instructions for the replacement of blades.
See also chapter 4.1.1 "Removing blade" (page
4).
9. Never leave spanners or wrenches attached to
the tool. Before starting the machine, inspect
the cutter to ensure that all spanners and
wrenches have been removed.
10.Use only original EFA accessories. Warranty is
voided, if other accessories are used. If other
tools inserts or accessories are used, there is
also an increased risk of injury to the operator
and other persons.
11.It is prohibited to modify the machine in any
way. S&W rejects any liability for damages
arising from modified equipment.
3. Commissioning and
operational safety
Workplace
The working area for the operator must be at least
1.5 m². This area must be kept clear and may not
be shared with any other staff, as the cutter is
moved during operation and could injure other
persons.
The working area must be
illuminated with min.
500 lux.
3.1 Commissioning
When connecting the hook cutter to the
pressure supply line, ensure that it is
switched off.
For detailed information, technical data,
parts lists and drawings of the
equipment, see appendix A (page 8).
3.1.1 Spring-loaded pulley
The machine may only be operated in
conjunction with a spring-loaded pulley.
The pulley must be attached to a beam
above the workplace or the ceiling. For
detailed information on how to install
and balance the spring-loaded pulley, please refer
to chapter 4.5 "Adjustment of spring-loaded pulley"
(page 4).
The hook cutter must be suspended in such a way
that its head section faces downwards. If required,
the tool can be realigned in vertical direction.