Viking 3 Manual
P5MVP3-AT
Page 19
AWARD BIOS SETUP
VGA (Off)
This function allows you to monitor the video display. Setting this to NO resumes
the system from Doze mode or Standby mode once an activity is detected.
LPT&COM (LPT/COM)
This function allows you to monitor the activities of the devices connected to the
serial ports and parallel port. Setting this to LPT/COM restores the system from
Doze mode or Standby mode if any activity is detected from these devices.
HDD&FDD (ON)
This functions monitors the floppy and hard drives. Setting the value to NO will
resume the system from Doze mode or Standby mode if any activity is detected
from those devices.
Resume by Ring (Disabled)
Enabling this function will power on the system if an external fax/modem receives
an incoming call.
Resume by Alarm (Disabled)
Enabling this function will power on the system at the specified time and date.
Setting the day of the month to zero specifies everyday as opposed to a specific
day.
4.7
PnP/PCI Configuration Setup
The PnP/PCI Configuration menu allows you to configure the ISA and PCI
devices installed on your system.
