Viking 3 Manual
P5MVP3-AT
Page 11
AWARD BIOS SETUP
Standard CMOS Setup
allows you to specify pre-defined and user-defined
settings for your IDE devices in addition to floppy drive setup and entering the
time and date.
BIOS Features Setup
allows you to configure functions of Award’s enhanced
features.
Chipset Features Setup
allows you to configure special chipset features.
Power Management Setup
allows you to configure power consumption and
power-saving features for your system.
PnP/PCI Configuration
allows you to configure your IRQ, DMA and other
resource settings for your system.
Load BIOS Defaults
will load the factory defaults for the BIOS.
Load Setup Defaults
will load the factory defaults for the Setup Utility.
Integrated Peripherals
includes configuration options for the on-board IDE
Controllers, Floppy Drive Controller, as well as Serial Port and Parallel Port
configuration.
Supervisor & User Password Setting
allows you to setup up a system
password which will require a password to be entered to complete the boot
process as well as a supervisor password to restrict access to the Setup Utility.
IDE HDD Auto Detection
This utility will detect and configure your IDE hard
drives and enter the information in the Standard CMOS Setup menu.
Save & Exit Setup
saves all changes made in the Setup Utility and reboots the
system so the changes can take effect.
Exit Without Save
will reboot the system without saving any changes made in
the Setup Utility.