POWER MANAGEMENT
Power sharing function limits the maximum power used. The maximum available
power (preset) is shared between the cooking zones. If all zones are turned on, the
power management will not allow all zones to operate at full power but will alternate
the power among all zones so the total power will be equal to the preset maximum
power. The change will be visible on power level displays. The last command given to
a cooking zone takes priority on the power setting.
SAFETY KEY LOCK
This function locks the touch control key to prevent unintended use, for example, to
prevent children accidentally switch on the cooking zones.
When the safety key lock is activated, all the controls except the ON/OFF key are
disabled.
To activate the key-lock
Touch the key lock control once, the timer indicator will show “Lo” and the key-
lock is activated.
To deactivate the key-lock, touch and hold the key lock control for 3 seconds
until the display “Lo” disappears.
When the hob is in lock mode, all the controls are disabled except the ON/OFF key
,
you can
always turn off the hob with the ON/OFF control. To use the cooktop after it is switched off,
key-lock protection has to be deactivated first.
RESIDUAL HEAT WARNING
When the temperature of the cooking zone is still hot after the hob is switched off, the
relevant letter “
” will be shown on the display as a warning of hot surface. Avoid touching
the cooking zone until the temperate drops to a safe temperature and the letter “
” is turned
off.
OVERHEAT PROTECTION
When overheating occurs, the cooking zone will display error code:
E6 – Overheating of cooking zone
E9 – Overheating of IGBT sensor
The induction hob will stop heating and no power will be delivered to the cooking zone.
Let the cooking zone cool down before using.
