Electrical Connection
Before completing any connection, make sure the house voltage corresponds to the voltage
indicated on the label affixed inside the appliance
It is advisable to call a qualified technician to make the electrical connection
.
Appliance fitted with plug
Connect it to a socket which conforms to current regulations. If you intend to connect it directly
to the electric mains, remove the plug and fit an approved bipolar switch with a minimum
contact opening of not less than 3mm.
If the plug is not accessible once it has been inserted in the socket, it will however be
necessary to fit an approved bipolar switch with a minimum contact opening of no less than
3mm.
Appliance without plug
Fit an approved plug or an bi-polar switch with a minimum contact opening of no less than 3mm.
T
he company is not liable for any problems caused by the user’s failure to comply with the above
instructions
9
Cleaning & Maintenance
Regular maintenance and cleaning ensures good performance and reliability, while
extending the working-life of the appliance.
SURFACE :
Wash with warm soapy water and a soft sponge. Never use abrasive detergent, scouring
pads, steel wool or solvents on any part of this appliance as this will cause irreparable
damage.
Note:Never use metallic scouring pads or abrasive products that could damage the surface.
Filter Cleaning:
Aluminium Grease Filters : Wash in the dishwashers or soak the panels in a degreasing
agent for an hour, then rinse off. The filter must be cleaned at least once a month or
depending on the frequency of appliance usage.
CHARCOAL FILTERS:
(only in re-circulating model): Charcoal filter cannot be reused. They must be
replaced with the appropriate types once a year or de-pending on the frequency of appliance usage.
For this appliance to function effectively, regular maintenance is a must. Clogged filters restrict airflow
and may cause the motor to overheat.
BULB REPLACEMENT:
Before attempting to replace the light bulb, make sure that the light
switch is turned off. Remove the grease filter to access the lamp area. Remove the
damaged light bulb and replace an bulb with maximum 40W.
