BoxPC-NUCV|NUCR
Device Reference Manual – P – Revision 3
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright © 2019|2020 by E.E.P.D. GmbH. All right reserved. |
Rev.3.0
16
MicroSIM Card
In order to insert the MicroSIM card, open the housing.
Remove the screws on the left, right and rear side (Fig.14). Then you can
take off the cover plate.
Fig. 14: Housing Screws
Fig. 15: Open Housing | MicroSIM Card Slot
To lock the card, fully insert it into the slot (Fig.15). Make sure the golden
contacts are downwards.
To remove the card, first push it inwards.
MicroSD Card
It is not necessary to open the case to insert the microSD card. The required
slot is located at the rear side of the system (Fig.16).
To lock the card, slide it completely into the slot until you hear a click. To
remove it, first push the card inwards.
Fig. 16: MicroSD Card Slot
MicroSIM Card Slot
MicroSD Card Slot
