BoxPC-NUCV|NUCR
Device Reference Manual – P – Revision 3
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright © 2019|2020 by E.E.P.D. GmbH. All right reserved. |
Rev.3.0
18
Pin Assignment
MiniDisplay Ports
Standard pin assignment
Fig. 18: MiniDisplay port detail
Fig. 19: MiniDisplay port schematic
Important Note:
There are two kinds of DisplayPort cables available:
Cables for direct connection to a MiniDisplay Port monitor
with Pin 20 on both ends of the cable NOT connected.
Cables for use with dongles (e. g. MiniDisplay Port to
Display Port, MiniDisplay Port to HDMI) with Pin 20 on both
ends of the cable connected.
Possible effects if wrong cable is used:
System might not start up properly.
Dongle doesn’t work properly (e.g. black display).
Dual-USB 3.0
Standard pin assignment
Fig. 20: Dual-USB 3.0 detail
Fig. 21: Dual-USB 3.0 schematic
