EEG EN537 Lexi Скачать руководство пользователя

Страница: 14 / 26

EN537 Smart Encoder

Cloning Live Data to Additional Encoders

(Clone Add-On)

The Clone feature re-transmits all control commands and caption data to one or more additional caption

encoders. The additional encoders can be connected either through RS-232, or through the Clone TCP/IP

interface.

To determine if Clone is installed on your unit, access your encoder’s web interface, look for an entry that

says

Clone

on the left side menu and select it

If you are prompted for a license key, the feature is not

installed and can be purchased by contacting the EEG sales team.

The master encoder must have the Clone port optional software installed, and then set up through clone

section of the web interface. When any “Clone Server” option is enabled, the encoder will copy commands

and data that are received through the dial up modem (MA), iCap, telnet, or RS-232 (P1, plus P2 if it is being

used for input and not Clone output). You can also choose to copy these commands to the RS-232 port

(Start RS-232).

Further documentation for this feature may be found at

https://eegent.com/support/resources

Figure 7: Clone Settings on the Encoder Web Interface

Содержание EN537 Lexi


























Результаты поиска

Содержание EN537 Lexi

Отзывы:

Похожие инструкции для EN537 Lexi

Бренды по названию

Популярные бренды

EEG EN537 Lexi, Руководство пользователя

Результаты поиска

Содержание EN537 Lexi

Отзывы:

Похожие инструкции для EN537 Lexi

Бренды по названию

Популярные бренды