EEG EN537 Lexi, Руководство пользователя, Страница: 24 / 26

EN537 Smart Encoder
Copyright © 2018 EEG Enterprises, Inc. 22
All Rights Reserved.
Startup Settings
The Startup Settings Editor enables entry of Encoder commands that will run every time the encoder starts
up. Use Startup Settings whenever you want a setting to be “sticky”; settings entered through the Web
Terminal or the serial port only are not sticky and will revert to defaults when the encoder is power-cycled.
Startup Settings can be accessed via the encoder web interface by selecting Startup Settings from the side
menu.
To use the Startup Settings editor, type any Smart Encoder command into the command box. Omit the
<CTRL+A> character entirely as this character is implied at the beginning of each line . To add additional
commands, press the ‘+’ button and more lines will appear.
When you have entered commands for all the settings that you want to make sticky, click Update Startup
Settings. The configuration changes will take the next time the encoder starts up.
Figure 10: Startup Settings on the Encoder Web Interface