manualshive.com logo in svg

EEG EN 530, Инструкция по эксплуатации

Поделиться
Скачать
EEG EN 530 Скачать руководство пользователя страница 28

 

 

EN530 HDTV Smart Encoder IV 

The EN530 is shipped with a cable adapter marked 2X3. This is a 3 wire 
RS232 adapter cable that converts a modular serial port connector to a female 
DB9 connector. This adapter may be connected directly to a standard PC serial 
port. If a longer cable is required, a 9-pin, three wire straight serial cable 
should be used. A “null modem” cable MAY NOT be used for this purpose 
since it will reverse the connections of pins 1 and 2. This adapter cable cannot 
be used with a data port that is configured for RS422 operation. The pin 
assignment of the DB9 connector of the adapter cable is shown below: 
 

Pin DB9 

Adapter 

1  
2 Tx 
3 Rx 
4  

 

5 Ground 

6-9  

 

GPI Switch Functions

 

 

 
Each GPI Switch is activated when connected to ground, and inactive when 
open, or left floating. The four default GPI functions are defined as follows: 
 

Switch 1: Force 608 Up-conversion 

Activating this function causes upconverted 608 caption data from the SD 
video input to be encoded onto the HD video outputs, even in the presence of 
upstream captioning on the HD input. Locally input data will still override the 
upstream 608 data, but all upstream VANC caption data will be ignored.  
 

Switch 2: Modem Lockout 

Activating this function disables the modem for data input. The modem will 
still answer calls, but users will not be able to enter caption data.  If a modem 
user is entering data, and then this switch is closed, the modem user will be 
booted out of data input mode. 
 

Switch 3: Port 2 Lockout 

Activating this function disables P2 for data input. Users connected to P2 will 
not be able to enter any caption data, and if a user is inputting data and then the 
switch is closed, the user will be booted out of data input mode.

 

 

  

©2000-2007 EEG Enterprises, Inc. 

27

Содержание EN 530






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды