manualshive.com logo in svg

EEG EN 530, Инструкция по эксплуатации

Поделиться
Скачать
EEG EN 530 Скачать руководство пользователя страница 26

 

 

EN530 HDTV Smart Encoder IV 

Set Clock 

<CTRL+A>c Time [Zone] [DST] <ENTER> 

 

Sets the Encoder’s internal clock and stores the settings in Non-Volatile 
Memory. If no parameters are entered, returns current settings. This 
information is only used for the optional generation of the Time of Day XDS 
packet. 
 

ƒ

 

Time

 is the local time on a 24-hour clock, in the format HH:MM:SS. 

 

ƒ

 

Zone

 is the local time zone, expressed by the number of hours local time 

differs from UTC time. For example, Eastern Standard Time would be 
entered as 5. If the parameter is omitted, current setting will be retained. 

 

ƒ

 

DST

 sets the Daylight Savings Time status and can be entered as ON or 

OFF. If the parameter is omitted, current setting will be retained. 

 

Set Date

 <CTRL+A>d 

Date <ENTER> 

 

Sets the Encoder’s internal clock for the date and stores the settings in Non-
Volatile Memory. If no parameters are entered, returns current settings. This 
information is only used for the optional generation of the Date XDS packet. 
 
The Date parameter must be entered in the form 

MM/DD/YY W

 where MM is 

the month (01-12), DD is the date (01-31), YY is the year (00-99) and W is the 
day of the week (1-7, with 1 representing Sunday). 

 

List PROM Messages

  <CTRL+A>J <ENTER> 

 
Returns a list of messages stored in the Encoder’s PROM. The PROM may 
store up to 8 factory configured commands that execute upon power up or 
reset. If PROM commands are present, they are executed before NVM 
commands.  
 

 

 

  

©2000-2007 EEG Enterprises, Inc. 

25

Содержание EN 530






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды