manualshive.com logo in svg

EEG EN 530, Инструкция по эксплуатации

Поделиться
Скачать
EEG EN 530 Скачать руководство пользователя страница 15

EN530 HDTV Smart Encoder IV 

Begin PassThru Mode

  

<CTRL+A>3 [Pairing] [Field]  <ENTER> 

End PassThru Mode

 <CTRL+C> 

 

 

Displayed as PTHRU. When a port enters the command to begin PassThru for 
a field, caption data received through that port will replace upstream caption 
data for that field in the SD and HD outputs. PassThru mode is for use with 
complete EIA-608 formatted data streams, including control and formatting 
codes, such as would be provided by captioning software packages. If 
PassThru is engaged but no valid data is being entered, pairs of null data bytes 
(80h 80h) will be inserted into output signals. When PassThru mode is ended, 
the field will return to upstream Regeneration. 

 

ƒ

 

Field

 specifies which NTSC field the locally entered caption data is 

intended for. Field 1 (enter as F1) is for primary language captioning and 
text, and Field 2 (F2) is for secondary language captioning and text. The 
parameter defaults to Field 1. 

 

ƒ

 

Pairing

 can be set using integer values from 1 to 4 corresponding to 

differing levels of control code processing. The table below describes the 
available levels. If the parameter is not set, the default for field 1 is level 4, 
and the default for field 2 is level 2. 

 
 

Control Code Pairing Settings 

1  All incoming data is passed. Control byte pairs will not be 

automatically aligned, which may lead to missed codes. 

2  Field 2 default. Control pairs are identified and delayed if 

necessary for correct alignment. 

3  Control pairs are corrected for proper alignment and 

doubled in Field 1. 

4  Field 1 default. Control pairs are corrected for proper 

alignment, doubled in Field 1, and non-Line 21 codes are 
omitted. 

 

 

©2000-2007 EEG Enterprises, Inc. 

14

Содержание EN 530






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды