Edwards PGC201, Инструкция по эксплуатации

Страница: 28 / 68

D0300040001EN - Installation
Page 18
The connection PM ( Figure 5 ) serves the purpose of connecting a CPG gauge head (see
Connectable gauge heads ).
Connecting:

Connect the CPG gauge head through the corresponding connecting cable to the
connection CPG on the rear of the PGC201.

Lock the plug using the knurled nut provided at the plug.
Analog output and external control (analog output / extern control)
The connection Analog Output / Extern Control ( Figures 5 and 6 ) provides the connections of
the analog outputs for the signals of the individual measurement channels as well as the
inputs for externally controlling the CPG gauge.
Figure 6 Connection plug for analog output and external control (SUB-D, 15-way)
Connecting:

Connect the peripheral components using a shielded connecting cable to the
connection Analog Output/Extern Control on the rear of the PGC201.
CAUTION:
Gauge heads which have not been designed to be operated in connection with the PGC201
or which do not comply with current EMC guidelines can impair operation of the
instrument or even damage it. Always operate the PGC201 with approved and approved
relevant connecting cables see
Connectable gauge heads .
CAUTION:
For utilising the connection CPG, a special cable from Edwards must be used.