Edwards HP20T, Руководство по безопасности и инструкция, Страница: 6 / 30

Warning Panel
Fluid Injection Hazard
Hydraulic hoses and cylinders are under
pressure. Pressurized fl uid can pierce skin
and cause severe injury. To avoid physical
hazard, always wear personal protective
equipment. Keep hands clear while oper-
ating. Lockout power before servicing.
Immediately replace guards after adjust-
ment, repair or service.
Electrical Hazard
This is the electrical hazard symbol. It indi-
cates there are dangerous high voltages
present inside the enclosure of this product.
ONLY qualifi ed, authorized, maintenance,
service or Certifi ed Electricians should gain
access to electrical panel.
Lockout Power
Danger circuits are live. Lockout/Tagout the
upstream power source.
Lockout / Tagout machinery according to
Employer procedures.
4
Notice Panel
Wear Personal Protective
Equipment
To avoid physical hazard, always wear per-
sonal protective equipment. Wear protec-
tive eyewear, clothing, gloves, footwear,
head-gear and hearing protection while
operating or servicing this machinery.
Refer to All Manuals
Each manual that comes with this machine
contains critical instructions regarding
proper operations, safety, installation and
maintenance procedures. Understand the
contents of each manual thoroughly. Failure
to follow proper procedures may result in
serious operator injury, machine damage
and will void your machine warranty. Keep
the manuals close to the machine for easy
reference.
Danger Panel
Do Not Operate With Guard
Removed
Physical barriers and guards have been
designed and installed to protect the
Operator from moving parts that can pinch,
cut and crush. Keep hands clear while
operating. Lockout power before servicing.
Immediately replace guards after adjust-
ment, repair or service to moving parts.
Shear/Crush Hazard
Moving parts can cut and crush. Keep
hands clear while operating. Lockout
power before servicing. Immediately
replace guards after adjustment, repair or
service.
Caution Panel
Hand Crank
Hand Crank activates measuring system
and tooling lock.